Information [Sticky] MagArrow Debugging

Hardware

Last Post by Rui Zhang 2 years ago

1 Posts

1 Users

0 Reactions

1,919 Views

RSS

Rui Zhang

(@rzhang)

Member Admin

Joined: 2 years ago

Posts: 83

Topic starter 15/08/2023 2:47 pm

If any errors occur, connect to http://192.168.1.1/systemtest.cgi and look for any error messages.

Please note that for "Combined sensor" (dead-zone-free) MagArrows, there is ONLY one reading in Mag1. Mag2 Data Valid is always "NO".

If the above webpage doesn't load, for embedded software release after July 2023 (version 3.0.1947-941 or later), a log file named "geometrics.log" is generated in the USB drive inside MagArrow. Remove the USB from the MagArrow and open the log file. Detailed description of the error can be found.

Refer to the following forum post for more information about reading dropout issues:

https://www.geometrics.com/community/magarrow-hardware/why-does-my-magarrow-have-0-readings-or-missing-records/#post-1160

Quote

Topic Tags