Notifications
Clear all
MagArrow
1
Posts
1
Users
1
Reactions
1,170
Views
Topic starter
13/05/2025 2:37 pm
Customer had problem connecting Wi-Fi using domain magarrow.net.
Solution: Verify the blinking LED patterns are ok:
1) One steady blink and a pause, about once per second - The MagArrow is ready for a WIFI connection from your device.
2) Two short blinks followed by a pause – A device is connected to the MagArrow’s WIFI. If your device or another nearby device is set to connect automatically, this two-blink pattern might commence quite soon after power-on.
If the MagArrow LED blinks normally, please try to connect to 192.168.1.1, instead of magarrow.net.
If the LEDs don’t blink in these patterns, refer to the user manual’s troubleshooting section and/or contact support@geometrics.com
Peter McMullen reacted