• Products
    • Seismographs
    • Magnetometers
  • Rentals
    • Rental Rates
    • Rentals Contact Form
  • Solutions
    • Engineering and Infrastructure Applications
    • Oil and Gas Exploration
    • Mining and Mineral Exploration
    • Geologic & Research Investigations
    • Environmental/Ground Water Studies
    • UXO Detection
    • Archaeology
    • Security and Detection
    • Orphaned Well Cleanup
  • Software
  • Resources
    • Geoelectrical
    • Magnetic
    • Seismic
  • Support
    • Community Forum
    • Troubleshooting and Theory FAQ
    • Return Material Authorization
    • Support Contact Form
    • Terms and Conditions
  • Company
    • Our History
    • Staff
    • Our Network
    • Careers
  • Contact
  • Forum
  • Payment
  • Forums
  • Members
  • Recent Posts
Forums
Search
 
Notifications
Clear all

Search result for:  id10=WA 0812 2782 5310 [[PANDAWA]] Penyedia Rumah Kayu Modern Mini Di Banjarsari Surakarta

 Search Phrase:
 Search Type:
Advanced search options
 Search in Forums:
 Search in date period:

 Sort Search Results by:


Does Geometrics equipment and software support "mini-sosie" surveying?
Hardware
Gretchen Sch...
3 years ago
15 Relevance
Surveying using a randomized impulsive source (called "mini-Sosie), such as a Wacker, is supported by the StrataVisor NZ and the Geode along with the Urban Seismic software and hardware package. Read our Random Source Seismic Surveying Manual In general, Mini-Sosie surveying is useful in noisy, urban environments, particularly in close proximity to roads where near-field noise suppression can be used effectively.
View entire post
Stacking Technical Note
Software
Gretchen Sch...
3 years ago
5 Relevance
Stacking is a complicated topic, and warrants its own technical note. Which stacking features are available and how they work depends which modes you are in. There are three main mode “groups”: SAVE, CORRELATION, AND STACK. Within those are sub modes whose names indicate their function. Save Autosave Manual Save Correlation No correlation Standard correlation Stack before Correlation Stack after Correlation Random Source Correlation Stack Autostack Replace There is a complicated interplay between the above modes and between these modes and the stack options: Stack polarity Display Intermediate Stacks Unstack Delay We will examine each possible combination in rough order of popularity Modes: Manual save , No correlation, Autostack This is the most common configuration used in refraction and downhole surveys. Each shot is automatically stacked Each stacked record is Displayed as the stack count increments The stack count continues to increment with each shot until you clear the data, even if you save the data sometime in the process. Stack Polarity can be changed at any time. This is most often used in shear wave surveys where reverse-polarity stacking is required. Unstack Delay gives you the option to unstack the most recent stack; for example, setting the stack count from 4 back to 3. The data will be held in a temporary buffer for n seconds, during which time you can choose whether to stack or not. If you do nothing, the data will be automatically stacked after n seconds, and unstacking will be no longer be an option for that stack. If Unstack Delay is set to zero, this feature is Disabled. Modes: Auto Save, No correlation, Autostack This is the most common configuration used in impulsive reflection surveys. Each shot is automatically stacked until the Stack ulmit is reached. When the Stack ulmit is reached, the data are saved automatically. Data are automatically cleared and the stack count is reset to one the next time the seismograph triggers after saving the data. Stack Polarity is generally left set to Positive. Displaying intermediate stacks is optional. Disabulng this option results in faster production, since the data do not need to be sent over the network with every stack. Modes: Auto Save, Standard Correlation, Stack Before Correlation This is the most common configuration used in swept-source reflection surveys. Each shot is automatically stacked until the Stack ulmit is reached. When the Stack ulmit is reached, the data are saved automatically. Data are automatically cleared and the stack count is reset to one the next time the seismograph triggers after saving the data. Data are stacked in raw, uncorrelated form in the Geodes, and are not sent to the PC until the Stack ulmit is reached. When the Stack ulmit is reached, the stacked raw record is correlated in the Geode (with the most recent pilot), sent to the PC, and saved. Modes: Auto Save, Standard Correlation, Stack After Correlation This is the most common configuration used in Random Source (mini-Sosie) reflection surveys. Each shot is automatically stacked until the Stack ulmit is reached. When the Stack ulmit is reached, the data are saved automatically. Data are automatically cleared and the stack count is reset to one the next time the seismograph triggers after saving the data. Each individual record is correlated with its own pilot and stacked in correlated form in the Geodes. Displaying intermediate, correlated stacks is optional. When the Stack ulmit is reached, the stacked, correlated record is sent to the PC and saved. Modes: Auto Save, Replace This is the most common configuration used in Continuous Recording surveys. Each stack is replaced by the previous. If Auto Save is not enabled, the previous stack is lost. If Auto Save is on the Stack ulmit is hard-coded to 1. Each shot is Displayed.
View entire post
Understanding Acquisition Filters in Seismographs - Their Use and how to Filter
Software
Gretchen Sch...
3 years ago
5 Relevance
Low Cut: , 10, 15, 25, 35, 50, 70, 100, 140, 200, 250, 280, 400 Notch: 50, 60, 150, 180 High Cut: 32, 64,125, 250, 500 or 1000 Hz The first recommendation for cases when you are having trouble getting sufficient signal to noise would be to increase your signal via stacking the data with multiple source events or get a more powerful seismic source. This will usually produce better results than the application of filters. Another approach would be acquire data when the noise sources are less present. That may mean collecting data at night when the area is closed or the traffic is less. Early morning can be better for areas where the wind tends to increase during the day. The selection of filters is very site dependent and can depend on a variety of factors as well as the type of survey being performed. 1) Typically the Notch filters are to remove noise due to electrical power lines (50 or 60 Hz and their harmonic frequencies depending on the country you are in). 2) Low cut filters are generally used for noise due to wind and moving vehicles, but care must be taken not to remove too much bandwidth from generated seismic signal. Often the noise sources have the same frequencies as the seismic data you are interested in and can’t be effectively removed using frequency filtering. 3) High cut filters can be used to remove noise from high frequency vibratory signals such as compressors or airplanes. In general it is best to record the data without any frequency filters and filter in post processing or only on the Displayed data in our software. It will be a matter of experimentation to determine the best filters at your site. Modern 24-bit seismographs (Geode, Stratavisor, ES-3000, etc) have a much wider range of signal amplitudes that they can record accurately. This means that they can still accurately record smaller seismic signals even in the presence of larger noise signals. Therefore there is a reduced need for analog filters that are applied prior to Digitization of the signals. Digital filters are more flexible and can be more specifically applied to the noise that is recorded rather than the “Broader Brush” of analog filters. Digital filters also have the benefit of being able to go back to the original data if the wrong filter is applied, which is not the case with Analog filters. The general approach in the seismic industry is now to record everything – including the noise – and the filter out what you don’t want later.
View entire post
Share:
Forum Information
Recent Posts
Unread Posts
Tags
  • 94 Forums
  • 233 Topics
  • 331 Posts
  • 1 Online
  • 249 Members
Our newest member: Jeremy Maurer
Latest Post: Geometrics preliminary MagArrow and MagEx data processing program download
Forum Icons: Forum contains no unread posts Forum contains unread posts
Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed

 Powered by wpForo version 3.1.7


Products

  • Seismographs
  • Magnetometers
  • Rentals

Company

  • Company
  • Careers

News

  • News
  • Events

Contact

  • +1 (408) 954-0522
  • 2190 Fortune Drive
    San Jose, CA 95131 U.S.A.
Privacy Policy
©2026 Geometrics. All Rights Reserved

The wait is officially OVER! 🚀 The ProtonScout is available NOW! Contact sales@geometrics.com to learn more and configure your system today.

Learn About the ProtonScout now!