Search result for:  id10=WA 0821 7001 0763 (FORTRESS) pintu baja mother and son Siriwo Kabupaten Paniai Papua

Hello Dear Rui, I have questions regarding MagArrow Magnetic data compensation, if you can answer please, 1- Does the heading error compensation that applied by surveying data processing program remove the heading effect due to direction only or calibrates the maneuver effect due to the swinging of the sensor as well? 2- Regarding the heading compensation flight, I am confused about the best way to do this. In the manual, it is mentioned that we can apply a cloverleaf pattern (this is usually used in airborne survey) or a survey pattern or we can do a 360 degree turn at a certain point. However, it is written that we can use the calibration data measured in the turn, can I use the data from the turn to apply the heading error correction separately for each flight instead of doing a heading flight. Regarding the cloverleaf pattern application, is the data also processed in the same way using surveying data processing program? 3-What is the importance of the base station magnetometer data in this correction as mentioned in the manual, I think we can apply it without base magnetometer? 4- Finally, is there a specific flight that can be done to make maneuver correction (FOM) (roll, pitch and yaw) that we apply in conventional magnetic airborne survey? or We just resort to the LP filter. Sorry for the long post Kind Regards, Ahmed

Attachment : New SeisImager Lite registration.pdf Attachment : SeisImager_Installation_Instructions_v7.6.pdf Please see the attached instructions. Registration ID's are typically found on the customer invoice, but can also be found using your order number or seismograph SN and company name here.

Hello! Concerning Appendix B of doc , what 16 bits of Mag1 Status and Mag2 Status represent in a data sample of ethernet packet? Thanks

The differences can be found in the document below. Difference between MagArrow I and MagArrow II

SeisImager can export processing or modeling results in several different formats. Two-dimensional sections can be exported to grid data which can be imported into Surfer and one-dimensional velocity profiles, traveltime curves, dispersion curves etc. can be exported as ASCII data, easily importable into Excel or other software.

@rzhang Thank very much for the immediate response. Legend!. All workign again.

@benjamin-johnson I uploaded a new config file. Please try it again.

I got it . it's worked now.

@rzhang oh i got it

@andreyudhistika It is the same link in the first post. I just replaced the file.

@rzhang sorry couldnt find it, could you provide link?

@andreyudhistika A new config file was uploaded a couple of days ago. Please download it again!

@georesults Hi Peter, I just downloaded the 2 zip files from the first post without any issue. I will investigate a little bit more.

Hi Rui Your above attachements are not working "-- attachment is not available --"

@andreyudhistika Did you download the latest configuration file, which is in a separate link, as well?