How to change the default IP settings for a MFAM Ethernet Adapter? - Hardware https://www.geometrics.com/community/mfam-hardware/how-to-change-the-default-ip-settings-for-a-mfam-ethernet-adapter/ Geometrics Discussion Board en-US Thu, 12 Mar 2026 10:51:39 +0000 wpForo 60 How to change the default IP settings for a MFAM Ethernet Adapter? https://www.geometrics.com/community/mfam-hardware/how-to-change-the-default-ip-settings-for-a-mfam-ethernet-adapter/#post-1219 Thu, 27 Mar 2025 19:28:00 +0000 1. Take out the micro-SD card and plug it into your computer.

2. Open the geometrics.cfg file using a txt editor, such as NotePad, inside the micro-SD (in case the file is missing, create a txt file and rename it to “geometrics.cfg”.)

3. The content of the "geometrics.cfg" file should have the following 3 lines for new IP parameters:

    StaticIP=192.168.2.23

    IPMask=255.255.255.0

    TcpStreamingPort=2100

4. A sample geometrics.cfg file can be downloaded here: Sample geometrics.cfg file

5. Without the micro-SD card, the IP setting is the factory default.

]]> Hardware Rui Zhang https://www.geometrics.com/community/mfam-hardware/how-to-change-the-default-ip-settings-for-a-mfam-ethernet-adapter/#post-1219