MagArrow Debugging - Hardware https://www.geometrics.com/community/magarrow-hardware/magarrow-debugging/ Geometrics Discussion Board en-US Mon, 15 Jun 2026 08:27:47 +0000 wpForo 60 MagArrow Debugging https://www.geometrics.com/community/magarrow-hardware/magarrow-debugging/#post-995 Tue, 15 Aug 2023 22:47:41 +0000 If any errors occur, connect to http://192.168.1.1/systemtest.cgi and look for any error messages.

Please note that for "Combined sensor" (dead-zone-free) MagArrows, there is ONLY one reading in Mag1. Mag2 Data Valid is always "NO".

If the above webpage doesn't load, for embedded software release after July 2023 (version 3.0.1947-941 or later), a log file named "geometrics.log" is generated in the USB drive inside MagArrow. Remove the USB from the MagArrow and open the log file. Detailed description of the error can be found.

Refer to the following forum post for more information about reading dropout issues:

https://www.geometrics.com/community/magarrow-hardware/why-does-my-magarrow-have-0-readings-or-missing-records/#post-1160

]]> Hardware Rui Zhang https://www.geometrics.com/community/magarrow-hardware/magarrow-debugging/#post-995