Using a USB/Ethernet Adaptor with ES-3000/Geode and SCS - Hardware https://www.geometrics.com/community/geode-hardware/using-a-usb-ethernet-adaptor-with-es-3000-geode-and-scs/ Geometrics Discussion Board en-US Wed, 19 Aug 2026 02:59:32 +0000 wpForo 60 Using a USB/Ethernet Adaptor with ES-3000/Geode and SCS https://www.geometrics.com/community/geode-hardware/using-a-usb-ethernet-adaptor-with-es-3000-geode-and-scs/#post-1222 Wed, 09 Apr 2025 14:19:08 +0000 Question: Can a USB/RJ45 Ethernet be used with a Geometrics Seismograph and SCS? 

Answer: Yes it possible to use a USB/Ethernet with Geode / SCS software. We have a “vetted” manufacturer we are now shipping with Geode orders.

PN 123-00287 (ADAPTOR, USB-ETH, FOR PCS W/O 10MBPS ETH OR RJ45 PORT, CONNECT BEFORE TURNING ON PC) $60 (check for current price)


Some vetted models that are available on the internet: 

Cisco USB300M.

Other vetted models:
HIRO H50223 USB 2.0
*TP-LINK model UE300 (USB 3.0)
Supereal SR9600 (USB 2.0)
ASIX AX88772a (USB 2.0)
* the TP-Link was the preferred choice

The important thing to consider is that the device must have the driver installed and be plugged into a 2.0 or 3.0 USB port when the PC is started.

]]> Hardware Randl Rivera https://www.geometrics.com/community/geode-hardware/using-a-usb-ethernet-adaptor-with-es-3000-geode-and-scs/#post-1222